Stroke: 1 mm ... 300 mm
Piston diameter: 16 mm
Based on standard: ISO 21287
Cushioning: Elastic cushioning rings/plates at both ends
Mounting position: optional
Mode of operation: Double-acting
Design: Piston Piston rod Profile barrel
Position detection: Via proximity switch
Variants: 
EX protection approval (ATEX) 
Metals with copper, zinc or nickel as main constituent are excluded from use. 
Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils. 
Extended male piston rod thread 
Custom thread on the piston rod 
Extended piston rod 
With protection against rotation 
High corrosion protection 
Uniform, slow movement 
Low friction 
Through piston rod 
Through, hollow piston rod 
Heat-resistant seals max. 120°C 
Laser etched rating plate 
Piston rod at one end
Operating pressure: 0.1 MPa ... 1 MPa
Operating pressure: 1 bar ... 10 bar
CE mark (see declaration of conformity): To EU Explosion Protection Directive (ATEX)
CE marking (see declaration of conformity): To UK EX instructions
Explosion protection: 
Zone 1 (ATEX) 
Zone 2 (ATEX) 
Zone 21 (ATEX) 
Zone 22 (ATEX)
ATEX category gas: II 2G
ATEX category dust: II 2D
Explosion ignition protection type for gas: Ex h IIC T4 Gb
Explosion ignition protection type for dust: Ex h IIIC T120°C Db
Explosion ambient temperature: -20°C <= Ta <= +60°C
Operating medium: Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium: Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC: 
0 - No corrosion stress 
2 - Moderate corrosion stress 
3 - high corrosion stress
LABS (PWIS) conformity: 
VDMA24364-B1/B2-L 
VDMA24364 zone III
Suitability for the production of Li-ion batteries: 
Metals with more than 1% copper, zinc or nickel by mass are excluded from use. 
Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils
Ambient temperature: -20 °C ... 120 °C
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke: 90 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke: 90 N ... 121 N
Moving mass for 0 mm stroke: 15 g
Additional moving mass per 10 mm stroke: 4 g
Basic weight for 0 mm stroke: 79 g
Additional weight per 10 mm stroke: 14 g
Type of mounting: 
Either: 
With through-hole 
Via female thread 
With accessories
Pneumatic connection: M5
Note on materials: RoHS-compliant
Material collar screws: Steel
Material cover: Anodised wrought aluminium alloy
Material piston rod: High-alloy steel
Material cylinder barrel: Smooth-anodised wrought aluminium alloy