Stroke: 1 mm ... 200 mm
Piston diameter: 16 mm
Based on standard: ISO 21287
Cushioning: Elastic cushioning rings/plates at both ends
Mounting position: optional
Design: 
Piston 
Piston rod 
Profile barrel
Position detection: Via proximity switch
Variants: 
EX protection approval (ATEX) 
Through piston rod 
Heat-resistant seals max. 120°C 
Laser etched rating plate
Protection against torque/guide: Guide rod with yoke
Operating pressure: 0.15 MPa ... 1 MPa
Operating pressure: 1.5 bar ... 10 bar
Mode of operation: Double-acting
CE mark (see declaration of conformity): To EU Explosion Protection Directive (ATEX)
CE marking (see declaration of conformity): To UK EX instructions
Explosion protection: 
Zone 1 (ATEX) 
Zone 2 (ATEX) 
Zone 21 (ATEX) 
Zone 22 (ATEX)
ATEX category gas: II 2G
ATEX category dust: II 2D
Explosion ignition protection type for gas: Ex h IIC T4 Gb
Explosion ignition protection type for dust: Ex h IIIC T120°C Db
Explosion ambient temperature: -20°C <= Ta <= +60°C
Operating medium: Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium: Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC: 2 - Moderate corrosion stress
LABS (PWIS) conformity: VDMA24364-B1/B2-L
Ambient temperature: -20 °C ... 120 °C
Impact energy in end positions: 0.15 J
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke: 90 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke: 121 N
Moving mass for 0 mm stroke: 29 g
Additional moving mass per 10 mm stroke: 6 g
Basic weight for 0 mm stroke: 93 g
Additional weight per 10 mm stroke: 16 g
Pneumatic connection: M5
Note on materials: RoHS-compliant
Material collar screws: Steel
Material cover: Anodised wrought aluminium alloy
Material seals: TPE-U(PUR)
Material end plate: Anodised wrought aluminium alloy
Material piston rod: High-alloy steel
Material cylinder barrel: Smooth-anodised wrought aluminium alloy