Uses
Expansion Bolts are for heavyweight fixings in concrete, masonry or natural stone. Great for installing a safe into the wall or floor. Vertical and horizontal loads can be handled. When tightening the bolt the nut is pulled into the shell expanding it and wedging it outwards inside the anchor base. Yellow passivation coating makes it more rust-resistant. Expansion bolts are used for heavy-duty fastening and fixing of steel or wood structures to masonry, concrete or bricks.

Preparation
Electric power drill
Masonry drill bit
Steel or wood drill bit
Spanner
The substrate should be structural sound
Method
Mark the correct position of the hole for the expansion bolt.
Drill the hole size for the shell (see table).
Remove all loose debris and cleanly drilled the hole out.
Drill a hole in the fixture for the bolt with a steel or wood drill bit (see table).
Place the expansion bolt in the wall and tighten the expansion bolt so that the shell expands in the wall into position. Screw the bolt out.
Align the fixture and then screw in the bolt tightly with a spanner (see table)
 
3M10
EXPANSION BLT 10mmDRL
   5x 50mm    
Q:2   
3M20
EXPANSION BLT 10mmDRL
   5x 50mm    
Q:6
3M30
EXPANSION BLT 12mmDRL
   6x 50mm    
Q:4
3M40
EXPANSION BLT 14mmDRL
   8x 40mm    
Q:2
3M41
EXPANSION BLT 14mmDRL
   6x 55mm    
Q:4
3M42
EXPANSION BLT 14mmDRL
   6x 55mm    
Q:2
3M43
EXPANSION BLT 14mmDRL
   6x 55mm    
Q:25
3M45
EXPANSION BLT 12mmDRL
   6x 55mm    
Q:60
3M50
EXPANSION BLT 12mmDRL
   6x 55mm    
Q:200
3M51
EXPANSION BLT 14mmDRL
   8x 65mm    
Q:2
3M55
EXPANSION BLT 14mmDRL
   8x 65mm    
Q:3
3M56
EXPANSION BLT 14mmDRL
   8x 65mm    
Q:4
3M60
EXPANSION BLT 14mmDRL
   8x 65mm    
Q:6
3N10
EXPANSION BLT 14mmDRL
   8x 65mm    
Q:12
3K22U
EXPANSION BLT 14mmDRL
   8x 65mm    
Q:30
3K52U
EXPANSION BLT 14mmDRL
   8x 65mm    
Q:150