Stroke: 2 mm ... 2000 mm
Piston diameter: 50 mm
Based on standard: ISO 15552
Cushioning: 
Elastic cushioning rings/plates at both ends 
Pneumatic cushioning, adjustable at both ends
Mounting position: optional
Design: 
Piston 
Piston rod 
Profile barrel
Position detection: Via proximity switch Without
Variants:
With end-position locking on both sides 
With end-position locking at rear 
With end-position locking at front 
Improved running performance 
Extended male piston rod thread 
Piston rod with female thread 
Custom thread on the piston rod 
Piston rod with external hexagon 
Extended piston rod 
Clamping unit on the piston rod 
With protection against rotation 
High corrosion protection 
Dust protection Uniform, slow movement 
Low friction 
Through piston rod 
Through, hollow piston rod 
Heat-resistant seals max. 120°C 
Temperature range -40 to 80°C 
Monostable valve, mounted on right, unactuated piston rod, retracted 
Monostable valve, mounted on right, unactuated piston rod, advanced 
Bistable valve, mounted on right, unactuated piston rod, retracted 
Monostable valve, mounted on left, unactuated piston rod, retracted 
Monostable valve, mounted on left, unactuated piston rod, advanced 
Bistable valve, mounted on left, unactuated piston rod, retracted 
Piston rod at one end
Protection against torque/guide: Square piston rod
Operating pressure: 0.02 MPa ... 1.2 MPa
Operating pressure: 0.2 bar ... 12 bar
Mode of operation: Double-acting
CE mark (see declaration of conformity): To EU Explosion Protection Directive (ATEX)
CE marking (see declaration of conformity): To UK EX instructions
Explosion protection: 
Zone 1 (ATEX) 
Zone 1 (UKEX) 
Zone 2 (ATEX) 
Zone 21 (ATEX) 
Zone 21 (UKEX) 
Zone 22 (ATEX)
ATEX category gas: II 2G
ATEX category dust: II 2D
Explosion ignition protection type for gas: Ex h IIC T4 Gb
Explosion ignition protection type for dust: Ex h IIIC T120°C Db
Explosion ambient temperature: -20°C <= Ta <= +60°C
Explosion protection certification outside the EU: 
EPL Db (GB) 
EPL Gb (GB)
Operating medium: Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium: Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC: 
2 - Moderate corrosion stress 
3 - high corrosion stress
LABS (PWIS) conformity: 
VDMA24364-B1/B2-L 
VDMA24364 zone III
Ambient temperature: -40 °C ... 120 °C
Impact energy in end positions: 0.2 J
Max. torque for protection against torsion: 1.5 Nm
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke: 990 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke: 990 N ... 1178 N
Type of mounting: Via female thread With accessories
Pneumatic connection: G1/4
Note on materials: RoHS-compliant
Material cover: 
Die-cast aluminium 
Coated
Material cylinder barrel: 
Wrought aluminium alloy 
Smooth anodised